Thursday, May 21, 2009

Up in the Air

I took the day off of work and went out to the museum with the intention of finishing up the inspection on the 309. When I arrived I moved the car over to the inspection pit in Barn 4, but as it turned out a crew was gathering to replace the overhead wire on the west station leads and I joined them instead. Spending the day working with Adam Robillard, Charlie Strong, Stan Wdowikowski, and Henry Vincent to help Line Department Head Max Tyms was a change of pace and quite an education. It was also quite enjoyable since it was sunny, in the 80's, and breezy!

We started out by detaching the 1/0 round wire between the west end of Station Track 2 and the West Switch, about 1,000 feet to the west, and hanging it off to the side with rope. The hangers were replaced with "dollies," or pulleys, and a guide rope was threaded through these, taking the place of the old wire. (In the photo at left, taken by Adam Robillard, Max is replacing the round-wire hanger with a pulley and I'm about to hand him the guide rope.) When finished with this, we went and got a reel of new 3/0 grooved wire, which was connected to the end of the guide rope and pulled through the 1,000 foot's worth of pulleys.

I had to leave early, but later on the line crew connected the new grooved wire to the frog at the West Switch and started hooking it up to the hangers heading eastbound. The intention is to replace all of the 1/0 round wire on the west station leads, including installation of brand new frogs on the Station 1/2 switch and Station 1/West Wye switch. This will make it unnecessary to "hop" the pole over the wire gap at the Station 1/West Wye switch and will be a big improvement! More photos taken by Adam of this work can be seen here.

While I was out with the line crew, Gerry Dettloff (right) was back in the shop doing inspection work on the 309. He was able to get all of the motor and truck inspection work done on the car, which is some of the toughest and dirtiest work of the inspection process. Thanks, Gerry!!

3 comments:

  1. Frank was a lineman for the county.....

    ReplyDelete
  2. I think the most impressive thing about the whole process was that the wire was live the entire time! Weird feeling working directly on 600VDC.

    ReplyDelete
  3. You'll get used to it quickly enough. I'm always more afraid of simply falling off -- that's probably the greater danger.

    ReplyDelete

Please identify yourself with a name of some sort in your comment. Completely anonymous comments will be deleted. Thanks!