Beep, Beep

 The list of things that need to be done for the 36 to run under its own power is steadily getting shorter.  One item is that we need to be able to connect the wires from the car to the motors correctly.

 

Ordinarily this should not be a problem.  On our other cars, it looks like this.  There are four (or five) wires from the control system motor circuits that are carefully arranged from left to right, clamped between two pieces of wood.  They terminate in quick disconnect hands.  The motor leads then attach to these wires from left to right, and as seen here on the 309, it's very straightforward.

But guess what: our esteemed colleagues in Cleveland decided to remove the wires from the clamps, for some occult reason, so that it's no longer obvious what order they were in.  Thanks, guys!  Here we see the leads to motor #2 hanging from the car, after I'd traced out the circuits and labeled them.

Now in order to trace the circuits, we ordinarily use what is called a ringer, which consists of a large battery and a doorbell ringer, with two long test leads.  If the two leads are electrically connected, the bell rings.  Last time we looked, however, the one working ringer had gone missing, so I decided to make a temporary replacement with what I had lying around.

 In my case, what I had lying around was a spare 15V transformer and American Flyer's version of a Diesel horn.  Actually, it's just an anemic beep, not very convincing as an air horn.  But it's fine for this particular purpose.  And in no time, we have a way to trace out motor circuits -- just listen for the beeps.  You need to plug it into AC, but otherwise it's just as good as a battery-powered ringer.  The components are carefully packed in a small box to protect them.

It turned out that the wiring of the reverser to the motors was not what I expected, but will work perfectly well, of course.  I then worked on getting the leads arranged back into the clamps in the correct order.  The tubes which should cover the disconnect are missing, and were replaced with electrical tape, so that's another thing to take care of.  But I should soon be able to hook up the motors when we're ready.

While I was out of town last weekend, Rod took care of removing the harps from the spare poles and installing them on the new poles we'll use for the car.  I installed the shoes and attached the shunts, and here we see a before and after picture of what these harps look like.  They were later painted with primer, and the poles will be ready to go onto the car anytime.

And then I did more stripping and repainting on the truss rods, as before.

In other exciting news, Tim Peters informed me that the E&B right-of-way through Camp Epworth is now up for sale for back taxes.  The price is something like $800, yes, less than a thousand.  I myself am not interested in starting my own competing museum along the old E&B, but if you are, Tim can help you out.  He'll be glad to show you the door.