Friday, August 30, 2024

IT 277 Update

 Another progress report from Gregg Wolfersheim:


Slowly but surely the baggage room is getting transformed. This is the left side that hasn't had windows in it for over 10 years.


The right side is also getting attention! 


The gate for the baggage door is in the process of getting stripped. Soon, primer and then black paint will make it look like new.




I've pointed this out before: Gregg doesn't have to do anything special to get his project featured here.  He just sends us a few clear photos with brief, informative captions, and we do the rest.  For free!

Monday, August 26, 2024

Let's Shelve That for Later

Frank writes...


Sunday was very hot, but I still managed to get a few things accomplished. First, I removed the last couple of the seats in the 451 and also took the leatherette antimacassars off the seats my father had previously removed. This final batch of about half a dozen seats are now ready to go to the upholstery shop. And the exciting news from Jon is that the shop has finished the previous batch and they're ready to come back! So, there's a lot of progress on this front. I didn't take any photos, I'm afraid.
For your regular dose of vermilion, here's the latest on Shaker Heights 63. After I was done with 451 seats and we had closed for the day, I rolled orange paint on the last patches of the car that still needed a first coat. The only area that hasn't had its initial coat of orange is the rear bumper, which first needs some white primer. Anyway, this side got some orange on the doors. Joel is also ordering new Lexan to replace the full-height windows in these doors, which are hopelessly fogged up.
And this side got some orange on the skirts. I also finished painting the back end of the car with a first coat of orange. And after dinner, I checked the oil in the air compressors on the 309 and 319 and separated the hoses and jumper between the 319 and 308. We're planning to run the 309-319 for the "evening shift" this coming Saturday and the 308 won't be coming along this time. Mark your calendar and join us, especially if you've never gotten to see our authentic kerosene marker lights in action!
The exciting news, though, was that Nick and Joel were assembling pallet racking in the Barn 4 extension. These are new-to-us steel sections that have been restored by the weekday guys. Above, Nick runs down a rolling scaffold while Joel stands back.
The racks were built slightly out from the wall for ease of assembly - but how to shove them up tight to the wall? Aha! Let the machines do the work: Joel figured out he could use the motorized pallet lifter and a block of wood to shove the racking back.
And here's the result: a whole lot of storage space. We still need to add the actual shelves, which will be made up of whatever 2x4s/2x6s/2x8s we can scavenge or buy cheap, and these will also get bolted to the floor for security. The next step will be to build a mirror image of this line of shelves (well, slightly shorter) on the other side of this same wall, in the eastward extension of the shop lean-to. In the middle-left foreground you can see some of the grey-painted parts that will be used for that project. In the far left foreground is Bob.

In other news, ComEd 4 is back in service following a successful test of its rebuilt grid box on Wednesday; Gregg was working on painting more interior parts in the 277; and Jim Ward was showing around a couple of visitors from the Western Railway Museum.

Sunday, August 25, 2024

In Memoriam Paul Sprenger


We regret to announce the death of Paul Sprenger, a long-time Museum member and friend.  The funeral will be on Tuesday in Crystal Lake; the details are in the obituary notice at this link.


Friday, August 23, 2024

Thursday Activities

I worked on a few different projects on Thursday, but all CA&E -- as you might have guessed.

First was reattaching the molding strip in the smoker of the 308 that had fallen out earlier.  I acquired some more wallboard anchors and installed them, so all of the screws in the molding have something to hold onto.  It seems nice and sturdy now.  It needs the paint touched up, so I need to find out whether the 308 ceiling paint is supposed to be the same as the 309's.



Then I took some measurements of the broken leaf spring assembly on the 36, and walked around the material yard.  We've got lots of spare trucks, and some with leaf springs, but none were the same type.  But several others are surrounded with trees and bushes, so they probably won't be accessible until spring.  And the trucks on the 36 are the oldest CA&E type in existence, so finding replacement springs may not be easy.  Go to this post and look at the third picture down.


Next, I was able to get a couple more seat frames detached from the walls in the 451, but it took a lot of effort.  And I still can't get the screws loose that hold the backs into the tubular frames.  Very frustrating -- maybe they need to be drilled out.


And I checked on the Jewell Road shelter, and picked up bolts for eventually attaching the new sign I made to the building.

Of course, other people were at work.  Here we see Tim painting clerestory frames for the 1808, as John looks on.



Wednesday, August 21, 2024

IT 277 Progress

Today we bring you some more impressive pictures from Gregg Wolfersheim of his progress on the baggage compartment of the 277.
 

I started painting the ceiling last week after clearing out the emergency tool box. 


Progress as of last weekend.

As the ceiling was finished, the left side wall and back side of the motorman's cab were painted.
Both the inner and outer sash for #14 were restored and put back in today. #13 and 15 are in the process of being painted and will go in soon.

The tool boxes and fire extinguisher box also reappeared!

Monday, August 19, 2024

PCC Painting Progress

Frank writes...


Good news, everybody! The paint I ordered came in and Joel even picked it up at the store in Huntley on Saturday. As such, on Sunday it was time to grab my trim roller and get to work.
Above is the "before" shot of car 63. Don't get too used to those red and orange stripes.
And this is an hour or so later, after painting the top half of the left side of the car vermilion. I had already done the edges and "inside corners" with a brush, but the trim roller was still instrumental in working around plenty of windows and other features. At this point, I took a break because it was time for a switch move!
The goal was to shuffle the order on track 73 a bit. The first three cars - 4391, 1374, and 18 - moved themselves out of the barn under their own power. Here's the 18 on the tail track. She doesn't look too shabby, if I do say so myself, though of course there's plenty more to be done in the way of exterior repainting.
The 63 was towed out by the 45-tonner. This was its first trip outside since we started painting it, so it was interesting to see the eye-searing shade of red-orange out in the sun. As you can tell, it needs another coat or two - probably two more coats on the bottom half.
We took the 18 around the car line a few times on training trips and stopped to get a shot showing half of our Shaker Heights Rapid Transit fleet (the half that's being restored to Shaker Heights colors!). Behind the 63 was Milwaukee 972, which moved itself out of the barn under its own power, and then the 63 was moved back in with the other cars on top of it.
After all the switching came dinner, and after dinner was more painting. This time, I did the bottom half of the car and got the front end (and around the front window) and left side. I ran out of time before I could complete the left side skirts or rear end, but it makes a big difference in the look of the car.
I couldn't replicate my "before" shot because the car is now 50' further west and there's a big pile of stuff in the way, but here's a rear three-quarters view. It's coming along!
In other news, Joel has started assembling pallet racking in the new Barn 4 extension. The south wall of the barn was pushed out a few feet to permit this; this will give us the ability to store a whole lot of spare parts a whole lot more efficiently. Thanks also go to the weekday guys who have been "restoring" and nicely painting the new-to-us pallet rack components!
Greg and Joel were both working on the grid box rebuild for ComEd 4. Here we see Greg "building the sandwich," as he said, and stacking the grid elements, mica washers and copper washers in the correct order.
Voila! This grid box is needed become the 4 is scheduled to pull a train over Labor Day Weekend. In other news, Zach and Norm were working on putting brush holders back into the 604 that had been temporarily removed as part of the 1702 project; they also inspected the 1702's motors, and all appears to be well with them for the moment.

Monday, August 12, 2024

Sunday Update

Frank writes...

The weather was gorgeous on Sunday, sunny and in the 70s. I had hoped to roll vermilion/orange onto Shaker Heights 63, but when I stopped by the paint store to pick up the paint I'd ordered, I was told it's back-ordered and hadn't come in. Rats. So, instead, I decided to paint more seats in the 18.
I only got two more seat backs done; they take about an hour each, not counting opening up the car, masking, and cleanup. Above, the rearmost seat on the left side of the car with the cushion removed and masking applied.
Here's a photo just after starting. The fresh paint certainly makes a big difference.
And here it is, done. That was as exciting as watching paint dry, wasn't it?
Here's a general view of the back half of the car. There's another cross-seat out of sight at bottom left that had already been painted, and the second seat in this section is visible with masking tape; I painted that seat back after taking the photo. About one-third of all the cross seats in the car now have their backs painted (and all but one of the cushions were previously painted by Frank Kehoe). After doing all this, I spent some time cleaning up stuff, including moving the unused spare parts from the Eclipse fender project back into storage.
So, what else was happening? A few of the regulars were out of town and others were helping with Diesel Days. I didn't get any photos because, well, they're diesels. But I did spot this intriguing sight in Barn 4: car 1808 in the background, Tim's current "big project," is next to car 1268 in the foreground. Both cars have their windows out. What the devil could he be up to? You'll just have to tune in next time to find out.
And an unexpected highlight was that after leaving the museum and calling my wife, she reminded me to pull over somewhere without a lot of light pollution to check out the Perseid meteor shower and the northern lights. I was rewarded with a single meteor that streaked overhead and took the above photo of the northern lights from the shoulder of Coral Road.

Saturday, August 10, 2024

Common Specifications: Stone & Webster Interurban Cars

Common Specifications:
Stone & Webster Interurban Cars
by Art Peterson with Frank Hicks
All photos are from the Krambles-Peterson Archive

Chicago Surface Lines fans know that Brill, CSL’s West Shops and Cummings each built cars to the CSL’s common specification for the front entrance-center exit (“Sedan”) streetcars of 1928.  Likewise, in the period between 1909 and 1913, three of the properties under Stone & Webster’s management bought interurban passenger cars from four different builders that were identically dimensioned and similarly equipped.

It's no surprise that Stone & Webster would develop a “tight” specification and stick to it.  As Hilton & Due noted, Stone & Webster was much more interested in the management, supervision, and engineering development aspects of the business at each of the properties they controlled.  Stone & Webster had developed common specifications for city car design and construction on their urban transit properties, so following a similar path for interurban car design was entirely logical.

However, this didn’t happen across the board – for example, the common specification was not applied to car purchases at Stone & Webster’s Puget Sound Electric, even though the nearby Pacific Northwest Traction did buy cars to the common specification design.  The Boston-based firm controlled six interurban properties (with the real focus being on affiliated power companies), with small concentrations of these holdings in Texas and Washington.

Stone & Webster was formed in 1889 by Charles A. Stone and Edwin S. Webster, to serve as an electrical testing and consulting firm.  By 1906, the firm had established the Stone & Webster Engineering Company. Charles Birney (yes, THAT Birney) was an engineer in the employee of Stone & Webster when he and Joseph Bosenbury designed the Birney car in 1915.

The 1924 edition of the McGraw “Electric Railway Directory” included a section listing holding companies.  Under the listing, Stone & Webster owned all the capital stock of the Galveston Electric Company, the Galveston-Houston Electric Company, the Galveston-Houston Electric Railway (GHE) and the Houston Electric Company.  They also owned all the capital stock of the Northern Texas Electric Company, the Northern Texas Traction (NTT) Company and the Pacific Northwest Traction (PNT) Company.  There were numerous other holdings, but it’s the three interurban companies – GHER, NTT, and PNT – that are of interest to this story.  The images are presented in chronological order.

The Common Specification Cars

NTT grew out of the Fort Worth streetcar system, which was acquired in 1900 and renamed to NTT.  The 35-mile interurban line to Dallas began service on July 1, 1902.  Kuhlman-built passenger cars (which wouldn’t have looked entirely out of place on the Northern Ohio roster) were initially used on the interurban.  The line was successful enough to attract the attention of Stone & Webster, which in 1905 formed the Northern Texas Electric Company to secure all the NTT stock.

Under Stone & Webster control, NTT moved to improve the physical plant and rolling stock on the Dallas-Fort Worth line.  Four cars built to the common specification were delivered by Kuhlman in 1909.  The builder photographed the first car of that order.  Not surprisingly, with Kuhlman a Brill subsidiary, the car rides on Brill trucks.  Northern Texas Electric (all holdings – rail and otherwise) was doing well around this time – net income increased 22% from 1909 to 1910, totaling $420,000.  The following year, the company would post a 13% increase in net income.  Also in 1911, NTT turned to Cincinnati for construction of a single car built to the common specification.  Unlike the Kuhlmans, car 20 rode on Baldwin trucks, and would use GE73 motors with C36C control.

The Seattle-Everett Traction Company was begun by Fred Sander in 1906. Stone & Webster acquired the operation from Mr. Sander and completed the line’s construction to Everett. In late August 1910, the Electric Railway Journal commented favorably on the line’s construction, noting that the maximum grade was 2%, while no curve was tighter than 4%.  A long tangent cut through 12 miles of old-growth forest was illustrated in the article, which indicated the level of effort required to complete the line to Everett.  Seventy-pound rail was used with 6 to 12 inches of gravel ballast beneath each tie. Initially, the line used cars from Stone & Webster’s Everett Railway Light and Water, transitioning to the Niles-built cars as they were delivered.

Half of Seattle-Everett’s Niles car order from 1910 is shown in this view adjacent to the barn in Everett (at California & McDougal) around the time service began. Like the NTT cars built the previous year, these cars were each 52’-0” long, 13’-0” high and 9’-0” wide.  Unlike the NTT order, these cars rode on Baldwin 78-25A trucks. Once again, GE motors and control equipment were used. The initial schedule run with the Niles cars required four of the six for service. Multiple-car trains were operated in the peak periods.

Operation under the Seattle-Everett name lasted barely two years.  In its January 30, 1912 issue, the Electric Railway Journal reported on the merger of the Seattle-Everett and Bellingham-Skagit interurban lines (both under Stone & Webster control) to form the Pacific Northwest Traction. With this consolidation, the line to Everett became PNT’s Southern Division. Heavy ridership on the Southern Division during World War One was accommodated by transferring one of the Northern Division cars south, and by the acquisition of two parlor cars from the Spokane & Inland Empire line.

The third property to receive common specification interurban cars was the Galveston-Houston Electric.  Cincinnati built the ten cars for the GHE in 1911 (the same year Cincinnati delivered car 20 to NTT). GHE had been chartered on March 2, 1905. A little over a year later, the GHE (still under construction) was acquired by Stone & Webster. The last spike was driven on October 19, 1911. The long construction duration for the 50-mile line can be explained in part by marshy land near Texas City Junction, which was slow to construct and by the need to construct a 10,642-foot causeway to provide access to Galveston. This structure included a half-mile of reinforced concrete arch viaduct. The causeway was shared with several steam roads and a county highway.

Wearing the stunning Packard Blue and Ivory scheme, with silver striping and the Bluebird “speed with safety” logos, GHE 107 and train pose on Texas Street in Houston. The 1926-vintage Auditorium Hotel (at Texas and Louisiana) towers over the handsome train. GHE was the first recipient of Electric Traction’s Speed Trophy, capturing this award in 1925 and 1926. Their hottest trains were covering the 50 miles in 75 minutes. The North Shore Line would win the trophy in 1927 and 1928, while the South Shore took the speed crown in 1929 and 1930. The 107 was one of four cars rebuilt to provide parlor seating up-front. Riders on these trains could purchase a “Pleasure Limited” Combination Ticket, including a $2 round-trip interurban ticket, admission to one of Galveston’s bathhouses and a night of dancing. 

In common with the rest of the industry the double whammy of improved roads and the depression would do in all three of these properties. As Hilton & Due noted, it appeared that Stone & Webster saw the trouble coming, thanks to the early demise of the Puget Sound Electric (December 1928) and the PNT Northern Division operation (September 1931). All three roads continued to use the common specification cars as their front-line equipment until the end.

NTT’s strong traffic base allowed it to go back to St. Louis for two more orders of common specification cars – the first four arrived in 1913, while the final four had 1921 build dates. Both orders incorporated arched roofs in place of the traditional railroad roof. However, even by 1913 and definitively by 1921, these cars were behind the industry trends in still relying on wood-steel construction (see the portion of the truss rod to the left of the car operator).

In 1925, the marketing-savvy NTT (the road won the Coffin Award that year) remodeled a number of the newer St. Louis-built cars for the “Crimson Limited” service. Initially, these were motor-trailer two-car parlor-coach consists. An August 1926 article in “Electric Traction” reported that NTT’s interurban ridership was up 14.8% due to repair work on the paralleling highway. That “bump” didn’t last long and by the early 30s the Limiteds were reduced to single-car trains. 

The end of NTT rail service came on Christmas Eve 1934 – a new Twin Coach 30A bus stands ready to take over the service. This view was recorded at another landmark Stone & Webster project – the 1916, $1.5 million Dallas Interurban Terminal. As late as 1932, there had been three rail tenants of the facility. With NTT’s demise, only Texas Electric would remain. 

Texas Electric would acquire six of the former NTT arched-roof standard specification cars in 1935. Two of these cars were from the 1913 order, with the balance being members of the 1921 group. Their operation on Texas Electric was short-lived. All six were retired after the abandonment of the Corsicana line on February 4, 1941. As CERA Bulletin 121 noted, two of the ex-NTT cars were rebuilt into flat cars by the Texas Electric’s Monroe Shops.

Bob Mehlenbeck’s father was a contractor, and a job in the Houston area in September 1935 gave Bob the opportunity to spend some time around the GHE in its dying days. Two of the handsome common specification cars rest at the Houston barn (on Texas at Smith Street) on September 20, 1935. By the time of this photo, the “Bluebird” look had been replaced by a simplified paint job, though still including outlining on the side panels and the dash. GHE’s tight operating practices (headlight assigned to and carried by specific cars) identify the two cars as being the 109 (at right) and 113. Note the Stone & Webster logo cast into the barn facade. GHE’s rail service had been reduced to hourly service in the peak, with trains every two hours or so at other times. GHE would quit running on October 31, 1936, with the final car tying up in Galveston at 1 AM on November 1. In full disclosure, it’s the GHE cars that initially drew my interest to the fine design details of the Stone & Webster interurbans.

Harold Hill did an amazing job of recording the North Coast Line’s (NCL) rail operation, including this view at Phinney and 50th, circa 1939. Initially, NCL was created to consolidate all the Stone & Webster bus subsidiaries operating in the Seattle area. From June 1, 1930 the Southern Division interurban operation, along with PNT’s bus division, were merged into NCL. A clear indication of where the priority lay could be found in a November 1931 “Electric Traction” article about NCL which made no mention whatsoever about the rail service.

NCL cars were light green (the one preserved NCL car has been painted in a blue-gray color) below a maroon belt rail stripe, cream through the windows and had gray roofs and underbody. Operating an hourly service, NCL normally required only four of the Niles cars (the 50, 51, 53 and 55 were the “usual suspects”) for service at this time. Both handicapped by and dependent upon using the 21/Phinney car line to enter downtown Seattle, NCL’s final rail runs occurred on February 20, 1939, as Seattle was in the process of converting its car lines to trolley coaches. Car 51 was one of the cars used on that final run out of Everett, running as 1st Train 19.

After its passenger-carrying days were over, the body of NCL 51 ended up as a lunch stand in Lake Stevens, WA (thirty miles north-northeast of Seattle). Sister car 55 did time as the “Old 55” diner in Everett. In 1964 it was acquired by the Puget Sound Railway Historical Society. The City of Lynwood later bought the car and restored it, putting it on display under an open-sided pavilion circa 2004.

Several famous works were essential to the completion of this piece.  These include:  Ira Swett’s 1959 “Interurbans Special” No. 22 on the GHE; Hilton & Due’s 1960 book “The Electric Interurban Railway’s in America;” CERA Bulletin 121 of 1982 on the Texas Electric (including the NTT); and, Warren Wing’s 1988 book “To Seattle by Trolley.”  In addition, I’d like to thank Randy and Frank for allowing this piece to appear on their blog.

Thursday, August 8, 2024

Wednesday Work

As usual, there were several Car Dept. projects being worked on, but I didn't take any pictures in Barn 4.  They were all things we've already seen: the 1808, 306, Kansas City PCC, and the diner.  Over in Barn 8, I noticed that Fritz was working on the North Shore MD car 213, and was able to help him attach the kick plates to the new sliding door.  He couldn't be on both sides of the door at once.




And here's a view of the east end of the car from inside.  This is much different than the cramped enclosed cabs on the later MD design. 


I spent most of my time working on the CA&E seat project.  Getting the old cushions out of the stationary seat frames is a lot of work.  And getting a new cushion into the frame is even more difficult.  There are problems we haven't solved yet.  I would have to say that in comparison to the old wooden cars, these weren't designed for ease of maintenance.  Just an opinion.

In any case, progress is being made, and once again we want to thank everyone who contributed to the seat project!

Wednesday, August 7, 2024

More IT 277 Progress

Gregg sends us another exciting set of progress photos on our Illinois Terminal combine!


After a little trim work and sanding the baggage door got primed.


Soon after it was painted.


This is on the left side of the baggage compartment. Previously stripped of paint and varnish. Some more sanding is needed on the trim above the window opening.



The finished motorman's cab door was rehung. Hardware was painted before reinstalling. The window that is open surrounds the pocket for the baggage door when it is open. We'll leave it varnished to show what the car looked like in its early days.
 

This grab iron was found by Zach in a storage car. It's now back on the car for the first time since 1958?

Tuesday, August 6, 2024

Vintage XXXIII

Frank writes...


Sunday was the 33rd Annual Vintage Transport Extravaganza, and I daresay a good time was had by all. We had something like 450 antique vehicles attend and the parking lot was full just about out to Olson Road.
My father and I were on the CA&E wood train, as shown above, along with car host Rene Ruano. With the 36 out of service and in need of leaf spring repairs, the 308 was pulled out of retirement and brought along as a control trailer, or "coach" as the CA&E called its trailers. It sure was nice to have the 308 back out on the railroad and hauling people for the first time in over five years.
Photo by Chris Buck
We can't let you get away without seeing a picture of the crew!  By the way, the Buck Brothers were along for at least one of the busier trips and helped by giving car talks and so on.

Here we are in Station Track 1 with the 1630 over on track 2. The four main line trains were the two shown here; North Shore 714-749; and the C&NW bi-level set, plus a pair of 4000s that ran shuttle service to Jefferson Street all day. Dispatcher Harold Krewer adroitly kept things moving, including regular meets with the shuttle train at Schmidt Siding, a capability that fell out of practice for years but has recently been resumed.
Early in the day, the C&NW bi-levels did a fast "load and go" stop at the depot while we were sitting on track 1. My father remarked that it was just like Wheaton!
And here's another shot of the three-car train at the station. For a few years, between when the 319 went into service in 2010 and when the 36 went into service in 2014, these three cars operated together semi-regularly.
I never got a chance to look around at the old cars on display, but I did manage to grab this shot of a lineup behind the depot. In the background you can see the 4000s at 50th. Car 24 was also at 50th Avenue, albeit just on display for the day.
Most of the volunteers were involved in operations or enjoying the car show. The bus guys, of course, had several buses and trolley buses on display, and Zach had his London Routemaster open for walk-throughs. Above, Zach took this photo in the morning of us pulling the CA&E cars out to the tail track past his bus, parked alongside Central Avenue on display.
Over in the shop, Joel was hard at work in the inspection pit finishing up inspection work on CA&E 431, which included replacing a couple of brake shoes and putting grease "cookies" in the center bearings. This followed the inspection of car 24, which was completed on Saturday. Good Nick was working on substation stuff. And as seen above, Brian was working steadily at the surface grinder, truing up the contact surfaces on resistance grids for ComEd 4. They're rebuilding a grid box for the locomotive and making sure all of the component parts are as good as new. I'll admit, this is more precise than when we rebuilt all those grid boxes for our cars - I would just use a wire wheel to clean up the grid element contact surfaces, slacker that I am. Jimmy and Bob, the latter visible behind Brian, also helped with this work.