Monday Report

Work continues on the 306.  Several parts of the original pneumatic door machines had to be fabricated, and here Phil is adjusting one of the parts.

Here Phil has one of the molding strips heavily clamped and glued to straighten it out.

Gerry and Phil were also working on the 306 seat frames again; here we see one that's just been welded.  Of course, now the welds need to be ground down, but when that's done, they look great.

Tim was working in the 1268 again.  And here we have lots of nice new rattan seats for the 3142.

And this is a new door for a baggage car over in Barn 3, made by Pete and Fritz.

I continued working on Jewell Road.  Here we see most of the new framing parts installed, so the roof at this corner is now much better supported.

And I purchased several new 8' pieces of interior siding and primed them in the back room.

As Frank mentioned, several compressors and motors were sent to the shop for rebuilding, and others were returned.  Here they are being unloaded by Dave and Carl. 

As Frank also mentioned, here's our latest acquisition.